Cronus 12

OHM

Speaker 12″ (30cm) 2-way  350W (8Ω)

The Cronus-12 has been developed for installed or portable near-field use with wide audio coverage at the core of it’s design.

The Cronus passive cabinet is designed with a 300 W, 10” woofer and 1” compression driver capable of 129 dB SPL, in a compact lightweight enclosure. The mid high features a phase plug limited horn that drives an inner slot driver achieving 160-degree horizontal dispersion. To match this, the low frequency bass driver is ported through a diffraction slot creating a truly linear frequency response achieving 65 Hz.

The rear cast aluminium connection plate has two 4 pin speakON® connectors fitted as standard, one input and one link. The speakON® connectors are wired on pins +1-1, with pass through of pins +2-2.

Key Features:

• Hi-Fi grade components give extended 50 Hz frequency response
• Wide and accurate 160° x 60° dispersion
• 8 Ohm impedance

Brand

Speaker Type (Pro)

, ,

Components & Features:

Drivers: 1 x 12” Full Range Driver
1 x 1” diffraction horn
Recommended Amplification: 350 – 700 Watts
Crossover:  Passive – 1.9 kHz
Active –  LPF – /HPF – 90 Hz (All Presets in OHM Library, Use Oyster / Cleo DSPs)
Speaker Cables:  Min – 2 x 2.5 mm2
Preferred – 2 x 4 mm2
Sensitivity Chassis 2.83V/1m:  98.5 dB
Max SPL: 124 dB Continuous, 130 dB Peak (Frequency Dependent)
Frequency Response (-3 dB):

Frequency Response (-10 dB):

57 Hz – 24 kHz

50 Hz – 26 kHz

Dispersion: 160° x 60°
Connectors: 2 x speakON® connectors
Dimensions (H x W x D mm): 606 x 370 x 370
Weight (kg): 21.1
Shipping Weight (kg): 23.1(1 cabinet per carton)
Color: Black
Finish Options: * Options Available in white or RAL colours on request
Weather Resistant:
Rigging: 4 x mounting for Powerdrive Bracket. 4 x
mounting points for installation brackets,
omni-mounting point for stand or truss
adaptor, (optional 2 x 3 point adaptor for
Horizontal Mounting)

Hardware:

Fitted as Standard Standard Cast aluminium top hat, Blanking
plate
Fitted as Optional Cronus-12 Cradle Vertical, PTL large wall
bracket pan and tilt, LWB-PT Large wall
bracket pan and tilt with 35mm spigot, LWB
large wall bracket, SS-1 speaker stand, TP-1
adjustable threaded pole

SHOPPING CART

close