Gemini

SKU: HT-GEMINI

Hall Technologies

4K 6 Multiformat Input Extender Switch with USB Extension for Soft Codec

4K 6 Multiformat Input Extender Switch with USB Extension for Soft Codec

This product is a 4K 6 Multi-format Inputs Extender Switch with USB Extension for a soft codec, which provides AV switching, USB, HDMI, DP, VGA, and USB-C extension, plus system control for meeting spaces using PC-based conferencing codecs such as Microsoft Skype, Webex by Cisco and Citrix GoTo Meeting. The kit offers six video inputs shared between both devices for HDMI, Display Port, VGA plus analog audio in and USB-C video signals. To simplify conference room device management, the kit provides four USB Type-B connectors for host computers. Six built-in USB hubs, three on the transmitter and three on the receiver, allow for numerous Human Interface Devices (HID) as well as USB cameras and microphones.
The kit is compatible with Ultra High-Definition source up to 4K/UHD@60 Hz with 4:2:0 color subsampling. All audio, video, data, control, USB, and Ethernet transmission between the two devices is carried over a single, Ethernet-enabled HDBaseT link up to 100m/330ft.
It simplifies classroom and small office system integration, for installation beneath conference tables and in lecterns, to provide localized presentation switching support.

Features

  • HDMI 2.0 with 4k@60Hz (Chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliance, VGA input up to 1920×1200@60Hz.
  • Provides a variety of interfaces including USB-C to simplify meeting room devices management.
  • Inputs connected to either the transmitter or the receiver can be displayed on the HDMI out on either the transmitter or the receiver or both simultaneously.
  • Automatically detects active inputs when sources are connected.
  • Supports USB hosts such as Desktop and Laptop, and peripheral USB devices such as keyboard, mouse, microphone, speaker, camera, and whiteboard for a conference system.
  • Ethernet can be connected into either the receiver or the transmitter, providing LAN accessibility for users.
  • Allows connected displays to be controlled via CEC commands or front panel buttons.
  • Relay commands can be triggered to control relay devices such as projection screens.
  • RS232 pass through; IR pass through from TX to RX.
  • API Control via LAN interface and RS232-C.
  • De-embedded audio can be routed out of the Receiver to an external amplifier.

Brand

TRANSMITTER:
Technical
Input/ Output Ports 1 x VGA IN, 1 X Audio IN (followed with VGA IN), 1 x HDMI IN,
1 x DP IN 1 x USB-C IN, 1 x HDBT OUT 1 x HDMI OUT, 2 x LAN,
1 x RS232-P, 1 x RS232-C, USB HOST, 3 x USB DEVICE,
1 x IR IN, 1x DC 12V IN
Input Signal Type HDMI2.0 with 4k@60Hz,(Chroma sub-sampling4:2:0 8-bit only);
DP/USB-C:DP 1.2
Output Signal Type HDMI2.0 with 4k@60Hz,(Chroma sub-sampling4:2:0 8-bit only);
HDBT2.0
Resolution Supported HDMI:
800×600@60Hz, 1024×768@60Hz, 1280×768@60Hz, 1280×800@60Hz, 1280×960@60Hz,
1280×1024@60Hz,
1360×768@60Hz, 1366×768@60Hz, 1440×900@60Hz,
1400×1050@60Hz, 1600×900@60Hz, 1600×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz,
1920×1200@60Hz, 480p@60Hz, 576p@50Hz, 720p@50/60Hz,
1080p@24/25/30/50/60Hz, 1080i@50/60Hz,
4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz,
DP/USB-C:
800×600@60Hz, 1024×768@60Hz, 1280×768@60Hz, 1280×800@60Hz, 1280×960@60Hz,
1280×1024@60Hz,
1360×768@60Hz, 1366×768@60Hz, 1440×900@60Hz,
1600×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz,
1920×1080@60Hz, 1920×1200@60Hz, 1280x720p50Hz, 1280x720P@60Hz,
1920x1080P@50Hz, 1920x1080P@60Hz, 3840X2160@50Hz, 3840X2160@60Hz,
4096×2160@50Hz, 4096×2160@60Hz
VGA:
640×480@60Hz, 800×600@60Hz, 1024×768@60Hz,
1280×720@60Hz, 180×768@60Hz, 1280×800@60Hz,
1280×1024@60Hz, 1360×768@60Hz, 1366×768@60Hz,
1400×1050@60Hz, 1440×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz, 1920×1080@60Hz, 1920×1200@60Hz,
NOTE: 4096×2160/3840×2160@50Hz/60Hz is based on chroma sub-sampling4:2:0 8-bit
only
Maximum Pixel Clock 297MHz
Audio Formate Supported HDMI: Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD Dolby Atoms, DTS-HD Maaster Audio and DTS:x
AUDIO IN: PCM 2.0
General
Operating Temperature 0°C to 45°C
Storage Temperature 20°C to 70°C
Humidity 10% to 90%, non-condensing
Surge Protection Voltage:±1KV
ESD Protection Human-body Model:
±8kV (Air-gap discharge)/
±4kV (Contact discharge)
Power Supply DC12V 2A
Power Consumption (max) 14.5W
Device Dimension (W x H x D) 220 x 42 x 150mm
Product Weight 0.97kg
RECEIVER:
Technical
Input/ Output Ports 1 x HDBT IN, 2 x HDMI IN, 1 x HDMI OUT, 1x IR OUT,
1 x RS232-P, RS232-C, 2 x LAN, 3 x USB DEVICE,
2 x USB HOST, 1 x USB HOST, 1 x SCREEN UP, 1 x SCREEN DOWN,
1 x DC 12V IN
Input Signal Type HDMI2.0 with 4k@60Hz,(Chroma sub-sampling4:2:0 8-bit only);
HDBT2.0
Output Signal Type HDMI2.0
Resolution Support 800×600@60Hz, 1024×768@60Hz, 1280×768@60Hz, 1280×800@60Hz,
1280×960@60Hz, 1280×1024@60Hz,
1360×768@60Hz, 1366×768@60Hz, 1440×900@60Hz, 1400×1050@60Hz,
1600×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz, 1920×1200@60Hz,
480p@60Hz, 576576p@50Hz, 720p@50/60Hz1080@24/25/320/50/60Hz
1080i@50/60Hz, 4096×2160@24/25/30/50/60Hz,
3840 x 2160@24/25/30/50/60Hz
NOTE:4096X2160/3840X2160@50Hz/60Hz is based on chroma sub-sampling
4:2:0: 8-bit only
Maximum Pixel Clock 297MHz
Audio Formate Supported Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD Dolby Atoms, DTS-HD Maaster Audio and DTS:x
AUDIO IN: PCM 2.0
General
Operating Temperature 0°C to 45°C
Storage Temperature 20°C to 70°C
Humidity 10% to 90%, non-condensing
Surge Protection Voltage:±1KV
ESD Protection Human-body Model:
±8kV (Air-gap discharge)/
±4kV (Contact discharge)
Power Supply DC12V 2A
Power Consumption (max) 16.5W
Device Dimension (W x H x D) 220 x 42 x 150mm
Product Weight 0.95kg
Transmission Distance Note:T5688 straight-through category cable is recommended
Cable Type Supported Video
Cat 5e Up to 1080p 60Hz 36bpp
Range(100m/330ft
Cat 6/6a/7 1080p 60Hz 48bpp
1080p 60Hz 3D
4k2k/30Hz/4:4:4 24bpp
4k2k/60Hz/4:2:0 24bpp
Range(100m)

SHOPPING CART

close